WATER SPORTS ACCESSORIES-Specifications

[Floating Hand Grip]

Release Date: N/A
Dimensions: Diameter 43mm, length 198mm
Weight: 83±2g (adapter not included); Max Load: N/A
Materials: Plastic, NBR (Rubber), Stainless Steel, Polyester
Connection: 3-prong mount
Selfie Stick: Does not support
Camera Compatibility: X Series (X4 Air, X5, X4, X3, ONE X2, ONE X) | Ace Pro 2, Ace Pro, Ace | GO Ultra, GO 3S, GO 3, GO 2 | ONE RS (Twin/4K), ONE R
Recommended Use: Water adventures
NOT Suitable: N/A
Packing List: Floating Hand Grip ×1, 1/4" to 2-Prong Adapter ×1, Thumb Screw ×1, Safety Tether ×1
Key Notes:
- GO 3/GO 3S WITHOUT Dive Case: must use with Magnetic Quick Release Mount
- GO 3/GO 3S WITH Dive Case: Magnetic Quick Release Mount not required
- GO 2: use with Action Mount Adapter
- Do not use with third-party accessories
- Confirm buoyancy is normal before entering water
- Remove items from handle and tighten base before entering water
- Wear Wrist Strap to prevent accidental loss
- Camera waterproofing is NOT changed by the grip — follow camera's own waterproof guidelines
- After use: soak in fresh water 15 minutes, gently rinse, dry thoroughly with soft cloth

---

[Dive Buddy]

Release Date: October 20, 2025
Dimensions: 160 × 92 × 41mm (6.3 × 3.6 × 1.6in)
Weight: Dive Buddy 325.5g (11.5oz); Underwater Tripod 135.5g (4.8oz)
Max Load: N/A
Waterproof Depth: Maximum 164ft (50m)
Materials: Plastic, Silicone, Copper, Stainless steel, Aluminum alloy
Connection: Universal 1/4" screw mount
Selfie Stick: Not recommended (bottom screw hole intended for Wrist Strap only)
Camera Compatibility: X Series (X3, X4, X5, X4 Air) — requires appropriate dive case
Recommended Use: Underwater; can also serve as static tripod on land
NOT Suitable: High-intensity activities on land
Packing List: Dive Buddy ×1, Weight Plates Set ×1, Underwater Tripod ×1, Wrist Strap ×1
Key Notes:
- Requires appropriate dive case for each compatible camera model — refer to camera's QuickStart Guide
- Effortlessly adjust buoyancy to let camera hover at any depth down to 50m
- When using underwater, beware of undercurrents; always wear Wrist Strap when not in use
- After seawater use: remove camera and soak Dive Buddy in clean water for at least 15 minutes; wipe dry before storage to prevent rust
- Store in dry, well-ventilated place; avoid drops and hard collisions (may impair underwater functionality)
- Compatible models continuously updated; check official store for latest list

---

[Floating Surfboard Mount]

Release Date: June 28, 2024
Dimensions: 220 × 170 × 80mm (2-Prong connector included)
Weight: 276g; Max Load: N/A
Materials: Plastic, stainless steel, EVA, silicone
Connection: 3-prong mount
Selfie Stick: Does not support (selfie sticks not compatible — may cause camera to fall)
Camera Compatibility: X Series | Ace Pro 2, Ace Pro, Ace | GO Ultra, GO 3S, GO 3, GO 2 | ONE RS (Twin/4K), ONE R
Recommended Use: Surfing only
NOT Suitable: Non-surfing scenarios
Storage Temperature: 10°C to 60°C (50°F to 140°F), humidity <90%; avoid overexposure to sun
Packing List: Tri-Float ×1, Sticky Base ×1, Silicone Mount ×1, 2-Prong to 1/4" Adapter ×1, Thumb Screw ×1, Alcohol Wipes ×2
Key Notes:
- Sticky Base has STRONG adhesiveness; extremely difficult to remove from surfboard and cannot be reapplied after removal — do not remove after surfing; rest on surfboard between sessions
- To remove: heat edge with hair dryer to soften adhesive; peel from edge; do NOT use sharp objects
- GO 3/GO 3S: install using GO 3/GO 3S Vertical & Horizontal Action Mount Set (sold separately); do NOT use with Action Pod — affects waterproofing
- GO 3/GO 3S with Action Pod requires Dive Case (sold separately)
- Tri-Float prevents sinking; mount will float or wash ashore if separated from surfboard
- When surfing without camera: remove Silicone Mount from Sticky Base OR insert Thumb Screw onto Silicone Mount to prevent being washed away
- If Silicone Mount or Tri-Float is washed away, must reattach before continuing use