CYCLING & SKIING ACCESSORIES-Specifications

[Helmet Mount Kit]

Release Date: N/A
Curved Base Dimension: 40 × 46mm
Weight: N/A; Max Load: N/A
Materials: N/A
Connection: 3-prong mount
Selfie Stick: Does not support
Camera Compatibility: X Series | Ace Series | GO Series | ONE RS (Twin/4K), ONE R
Recommended Use: Motorcycling, MTB, skiing, or any sport using a helmet
NOT Suitable: N/A
Packing List: Adjustable Mount ×1, J-shaped Mount ×1, Curved Base ×2, 3M Sticker for curved base ×2, Flat Base ×2, 3M Sticker for flat base ×2, Safety Tether ×1, 1/4" Camera Mount Adapter ×2, 1/4" Thumb Screw ×3
Key Notes:
- GO 3/GO 3S must use with Quick Release Mount; GO 2 must use with Action Mount Adapter
- Double up on 3M stickers for additional adhesion if needed
- Stick to clean, dry, smooth surface 24 hours in advance at room temperature
- Use Safety Tether as backup
- When using a camera with threaded base, use 1/4'' screw adapter
- If helmet surface is matte, do not use in strong winds
- Adjust Adjustable Mount direction with M5 screwdriver

---

[Unicorn Helmet Mount]

Release Date: N/A
Dimensions: Rod length 330mm (13in); 3M Adhesive 35 × 45mm
Weight: Rod 27g (0.95oz); Max Load: 200g
Materials: Carbon fiber, stainless steel, aluminum alloy
Connection: Universal 1/4" screw mount
Selfie Stick: Does not support
Camera Compatibility: X Series | GO Ultra, GO 3S, GO 3 | ONE RS (Twin/4K), ONE R
Recommended Use: Skiing, mountain biking, motorcycling, skateboarding, and other sports requiring a helmet
NOT Suitable: Skydiving, bungee jumping, wing-mounted flying, high-speed aerial sports (may get caught in parachute)
Max Speed: 80km/h on flat roads; 40km/h on uneven roads
Operating Temperature: -20°C to 40°C
Packing List: Unicorn Rod ×1, Curved Base ×2, 1/4" Thumb Screw ×2, 1/4" Camera Mount Adapter ×1, 3M Sticker ×3, Stabilizer Ring ×4, Safety Tether ×2, Thumb Screw Wrench ×1, Fixing Nut ×1
Key Notes:
- At high speeds or strong vibrations, connect to safety tether for extra security
- If helmet has matte finish, do not use in strong winds
- Choose a position close to the arc of the base for better fit
- Stick 3M sticker at room temperature 24 hours in advance on clean, dry, smooth surface
- Only tested with Insta360 cameras; if using other cameras, ensure weight does not exceed 200g

---

[Ski Pole Mount]

Release Date: January 4, 2024
Dimensions: 88 × 43 × 70mm (3.5 × 1.7 × 2.8in)
Weight: 120g (4.2oz); Max Load: N/A
Materials: Aluminum alloy, stainless steel, silicone, plastic
Connection: Selfie stick clamp
Selfie Stick: Supported
Camera Compatibility: X Series | Ace Series | GO Series | ONE RS (Twin/4K), ONE R
Recommended Use: Skiing only
NOT Suitable: Non-skiing
Compatible Pole Sizes: 14–22mm
Packing List: Ski Pole Mount ×1, Hex Wrench ×1, Selfie Stick Clamp ×2, Ski Pole Clamps (14/16/18/20/22mm) ×5
Compatible Selfie Sticks: Action Invisible Selfie Stick (1m), 70cm, 85cm, 114cm Invisible Selfie Sticks
Key Notes:
- 70cm and 114cm sticks: use 23mm Selfie Stick Clamp
- Action Invisible Selfie Stick (1m): use 24.5mm Selfie Stick Clamp
- Extend selfie stick to full length for downhill, telemark, cross-country skiing
- Shorten for freestyle, backcountry, slalom, carving, high-intensity skiing (where frequent pole use required)
- Recommended to use with Action Invisible Selfie Stick for best experience-

---

[Snow Kit]

Release Date: N/A
Dimensions: Flexible Adhesive Mount 66.5×66.5×48.0mm; Chest Strap 336×243×60mm; Helmet Extension Rod length 33cm
Weight: Flexible Adhesive Mount 40.0g (1.41oz); Chest Strap 207g (no adapter); Helmet Extension Rod 27g (0.95oz)
Max Load: N/A
Materials: Flexible Adhesive Mount: TPU + Silicone + Stainless Steel; Chest Strap: Fabric + plastic + stainless steel
Connection: N/A
Selfie Stick: Does not support (Chest Strap and Helmet Extension Rod cannot connect to selfie sticks)
Camera Compatibility: X Series | Ace Pro 2, Ace Pro, Ace | GO 2 | ONE RS (Twin/4K), ONE R
Recommended Use: Skiing
NOT Suitable: N/A
Packing List: Helmet Extension Rod with Fixing Nut ×1, Chest Strap ×1, 1/4" Thumb Screw Wrench ×5, Anti-slip Rings ×4, Mount Extension ×1, 1/4" to 3-Prong Adapter ×1, 1/4" to 2-Prong Adapter ×3, Flexible Adhesive Mounts ×2, Cleaning Wipes ×2
Key Notes:
- Flexible Adhesive Mount: Clean surface before use; sticky base cannot be reused once removed; press 30 seconds after sticking; wait 24 hours before use
- For skiing: recommended to stick Flexible Adhesive Mount to helmet
- Chest Strap: cannot connect to selfie stick or extension
- Helmet Extension Rod: can ONLY be mounted to helmet with included Flexible Adhesive Mount
- If 3-prong adapter becomes worn, apply anti-slip ring for more security
- Mount to smooth, clean surfaces: glass, ceramic, plastic, painted surfaces, metal